Offset Ink

Offset ink is also called offset printing ink. Its varieties include offset resin ink, offset bright ink, offset four-color printing ink, offset quick-fixing ink, offset bright quick-drying ink, offset sheet-fed ink, offset rotary press ink, offset rotary thermosetting ink, offset printing iron ink, offset plate Printing iron retort-resistant ink, offset plastic ink, offset light curing ink, etc.

There are many types of offset inks, but the requirements for the machine are mainly three-roller and dual shaft mixer for production. We provide the entire process production line, and also provide the ultimate after-sales service.

Offset ink needs a butterfly mixer, twin shaft disperser (high speed and low speed), high viscosity bead mill, and hydraulic three roll mill. Why should need two kinds of mixer machine? Pre-mixing and then adjusting mixer after add additional chemicals.

1. high speed viscosity mixer for offset ink, which is mainly used for offset ink, which adopts the butterfly blade the shaft can lift up and down while mixing materials, the materials can be dispersed at various angles; In addition, we also match the clamp on the high-speed viscosity mixer for offset ink, the mixing tank can be fixed well when mixer for offset ink running, which make the operating stable and high efficiency.
2. Dual shaft mixer for offset ink was be adopted next to the high viscosity mixer for offset ink, high speed and low speed can run separately, the low-speed blade rotates around the tank side, and the Teflon scrapper can clean the tank side very well, then the high speed running when the low-speed blade running, which mixing and dispersion are running together, so the shear force is higher.

3. Dyno mill for offset ink, which is designed for high viscosity material;

1). Auto-control pressure for the inner chamber, which makes the grinding effect better,
2). Double cooling for both rotor and stator, can make the material temperature reduce when operating.

3). Grinding medium adopts 0.8-2.5mm, which can make the discharging material reach 5-15um

4). Higher sealing of double mechanical seal, which avoids the material leaking when operation.

4. After the dyno mill for offset ink, we suggest matching the extruder for offset ink, as the offset ink is with high viscosity, transferring the high viscosity material to three roll mill is not convenient, the tank of the extruder for offset ink can be lifting and downing, and there’s discharge port at the bottom side of extruder tank, which can adjust a suitable place to feeding the material to the three roll mill, which is more convenient.

5. Three roll mill for offset ink match after the dyno mill is perfectly matched for offset ink production. Franli three roll mill with hydraulic system, which has high efficiency for grinding, and the three rolls are with frequency control, which can fit different viscosity of materials. Controllable pressure and gap of rolls, make the adjustment accuracy to keep the stable discharging.

(note: some customers will add one more three roll mill for grind one time, which can make the offset ink color more bright, this is popular in the Chinese market)

Related Products

Plateform Type High Speed Disperser
all

Plateform Type High Speed Disperser

Platform type high-speed disperser is mainly used for high production material. Normally the high-speed disperser is installed between two tanks, easily mixing material in two tanks. also another type.

Contact ➔
laboratory reactor
all

Laboratory Reactor

FRANLI laboratory reactor is composed of a pot body, pot cover, stirrer, heating jacket, support and transmission device, shaft seal device, etc. The pot body, pot cover, stirrer, shaft seal, etc. are all made of 1Cr18Ni9Ti stainless steel. A laboratory reactor is mainly suitable for hydrolysis, neutralization crystallization, distillation, evaporation, storage, and other production links in medicine, bioengineering, fine chemical industry, chemical synthesis, food, and other industries.

Contact ➔
Vacuum kneader
all

Vacuum Kneader

The vacuum kneader is an ideal equipment that is suitable for high-viscosity material, such as high-viscosity silicone rubber, sealant, gum, cellulose, etc. Also used widely in the Paint, ink, pigment, resin, battery, cosmetic, etc industries.

Contact ➔

After Sales Support

News

Chemical Reactor: Multifunctional Reaction Equipment

A chemical reactor is an essential piece of equipment in the chemical industry. It is used to carry out chemical reactions, which are the basis of the production of various chemicals, pharmaceuticals, and materials.

Filling Machines: 5 Common Types

A filling machine is a mechanical device that is used to fill containers with a specific amount of product. These machines are commonly used in the food and beverage, pharmaceutical, and chemical industries. They are designed to fill containers of various shapes and sizes, from small bottles to large drums.Filling machines are essential pieces of equipment for companies that need to fill various products into containers.

Pneumatic Mixer: Solution for Mixing Applications

A pneumatic mixer is a type of industrial mixing equipment that uses compressed air to power the mixing process. This type of mixer is commonly used in a variety of industries, including chemical, pharmaceutical, and food processing.

High Speed Disperser: An Essential Tool in the Manufacturing Industry

A high speed disperser is a machine used for dispersing, mixing, emulsifying, and homogenizing materials in the manufacturing process.It is also called a high-speed mixer or agitator, and its versatility makes it a valuable tool in various industries, including coatings, paints, inks, adhesives, pharmaceuticals, food, and cosmetics.