Home » Bead mill for ink
Bead mill for ink
What kind of ink you are producing?Offset ink, gravure ink, printing ink, digital ink, letterpress ink, packaging inkjet, industrial inkjet, commercial inkjet?If the ink is discharged statically.
For inks, the wear on the wearing parts will be less, because the viscosity of the ink itself is relatively high, the oil is oily, and the zirconium bead wear is relatively small.
Nano Mill
Then our bead mill generally uses 0.2, 0.3mm, with static discharge, the screen is 0.3mm, if the beads are 0.2mm, the beads will run out, with 0.2mm beads, the processing accuracy of the bearing seat cannot be guaranteed. Bearings It is oily. In the process of operation, the coaxiality of the interbody is not so standard, so it is not acceptable to use 0.2-0.3mm beads. If the viscosity is low, use the meshless one, and the viscosity will be higher. Yes, it is necessary to bring a screen, the screen may use a gap of 0.05 or 0.1.
Cone bead mill
Disadvantages: In the cylinder bead mill, the linear velocity is not uniform. The linear velocity of the big head is the highest. When the cone rotates, the linear velocity of the big head is the highest, and the smallest head is the lowest. So when selecting the line speed, Whichever is the highest or the lowest? Line speed has a set value in the industry
If you take the big head as the standard, the small head linear velocity will be too low, which means that this part of the solvent space is equal to waste, and the efficiency is low; if the small head is the standard, the big head is low, the linear velocity will be very high, which will cause wear Intensified, it will also cause the temperature to be too high.
The FRANLI BEAD MILL is a machine for continuous superfine grinding and dispersing of solids in liquids. It works following the principle of agitator bead mills, where grinding media is accelerated in the grinding tank by an agitator shaft. The energy given to the media is passed onto the solid particles under collision and de-acceleration. Due to the tank being in a horizontal position, the special agitator gives an even activation of grinding media over the whole tank content.
The following advantages result from this:
• closer grain distribution;
• less strain on the grinding system;
Operation of bead mill
The Bead mill contains important information on how to 0 operate the machine safely properly and most efficiently.
Observing these instructions helps to avoid danger, to reduce repair costs and down-times, and to increase the reliability and life of the machine. The instruction manual is to be supplemented by the respective national rules and regulations for accident prevention and environmental protection.
The operating instructions must always be available wherever the bead mill is in use and must be read and applied by any person who carries out works on the machine. In addition to the operating instructions and the mandatory rules and regulations for accident prevention and environmental protection in the country and place of use of the machine, the generally recognized technical rules for safe and proper working must also be observed.
Therefore we kindly ask you for your understanding that changes in the design or of the models of our product range may arise, that are reasonable for the buyer.
Please be advised that no essential change in the function will take place.
No claims can be derived from the illustrations and descriptions of this operating manual.
These operating instructions of the bead mill are only applicable to the order confirmation number stated on the cover sheet. This number can also be found on the bead mill nameplate.
Welcome to check our factory and testing machines by your materials.
Copyright Notice :
This article only represents the author’s point of view.
This article is published under the authorization of the author.
Source: Franli
This article address : Bead mill for ink
Related Products
Lab bead mill
FRANLI Lab bead mill is widely used in coatings, inks, fuels, non-metallic mineral ultrafine powder, magnetic recording materials, and other industries.
Butterfly Disperser
This kind of butterfly mixer is used in offset ink, putty etc industry. The butterfly dispersing mixer is a product with the functions of dispersing and stirring (wall scraping) developed on the basis of a single-axis hydraulic lifting disperser.
Hydraulic Lifting High Speed Disperser
The hydraulic lift high speed disperser has the characteristics of simple operation and high flexibility. The hydraulic lifting high speed disperser is suitable for the production of paints, inks, coatings, dyes, papermaking, etc.
News
High Shear Mixers in Biopharmaceutical Applications
high shear mixers are highly versatile and can be used for a wide range of applications in biopharmaceutical manufacturing.
Operating Guide for Laboratory Reactors
Laboratory reactors play a crucial role in chemical research and development. Understanding the proper operating procedures is essential to ensure accurate results and maintain a safe working environment.
Glass Reactors and Selection of Stirring Blades
Glass reactors, also referred to as glass reaction vessels, are vessels made from high-quality borosilicate glass material.
High Shear Mixers in the Resin Industry
High shear mixers are essential equipment in the resin industry for achieving uniform dispersion of solids into liquid matrices, emulsifying oil-based components, and blending various additives to create resin formulations with desired characteristics.
High Speed Dispersers for Painting: Enhancing Efficiency and Quality in the Coating Industry
High-speed dispersers are powerful machines used in the paint and coating industry to disperse solid particles into liquid components effectively.
Ribbon Blender Mixer: The Right Choice for a High-Quality Blender
Ribbon blender mixers, also known as ribbon mixers or ribbon blenders, are horizontal mixing devices characterized by their unique ribbon-shaped agitators.