Immersion Mill

FRANLI immersion mill(basket mill) is a new type of discontinuous ultrafine mill integrating grinding and dispersing. After many studies and data, it is shown that this immersion mill is especially suitable for the production and grinding of small batches and multi-variety products. At present, our immersion mills have been exported to more than 30 countries, involving as many as 22 fields, and have been recognized and praised by many partners.

Advantages of immersion mill:

  • Low energy
  • No hot spots
  • Controlling constant temperature
  • Easy to use

Application

Coating

Cosmetic

Battery

Battery

Graphite

Graphite

Agrochemistry

Agrochemistry

Adhesives

Adhesives

Hot sale basket mill

Technical Parameters

basket mill

Guidelines For Immersion Mill

The application of immersion mill in paint production is also quite extensive, and it is more and more recognized by manufacturers, and its application range is gradually increasing. Compared with the previous immersion mills, it is often used in architectural coatings, ordinary wood paints, general industrial paints, anti-corrosion paints, etc. However, after the technical progress of the immersion mill, and FRANLI machinery for more than 20 years Our research, we have now extended to high-quality colorants, industrial paints below 15 microns, plastic paints, and water-based industrial paints, automotive paints, and other fields.
The reason why the immersion mill is recognized by everyone is mainly because of its unique working method of the immersion mill. In addition to overcoming some shortcomings of the horizontal mill and being closer to the needs of the market, compared with the lower basket The mill also has the following advantages:
1. Fewer residues and higher yield. Compared with the horizontal mill, the residual of the immersion mill is negligible, and the yield rate is extremely high, which is especially suitable for the production of small batches and multiple varieties.
2. The structure is simple, and easy to disassemble and clean, especially without the use of a feed pump and corresponding pipeline, which makes cleaning and color changing easier.
3. The basket-type mill has a smoother discharge and large circulation, which can give full play to the advantages of circulating grinding in the cylinder.
4. High wear-resistant alloy steel is widely used in the grinding chamber to reduce metal pollution, and the grinding white slurry does not change color.
5. Basket jacket structure, can pass cooling water, reduce solvent volatilization, environmental protection, and reduce cost.
FRANLI immersion mill is mainly suitable for small batch production (immersion mill with special power, which can be directly customized), pre-dispersion, and grinding can be done in one slurry tank. Its main shaft can not only adjust the speed, but also has the characteristics of the stable overall operation, low noise, less auxiliary equipment (easy color change), convenient cleaning, and easy replacement of grinding media.
The FRANLI series of immersion mills are discontinuous mills that have been successfully used in various fields such as the paint industry and the pigment industry for many years. Compared with similar immersion mill equipment, the FARNLI series immersion mill is easy to operate, with a closed rotating basket and concentric rotating bearings. At the end of each batch, the remaining product is thrown out of the rotating basket. Guaranteed minimal product loss.
FRANLI is a very professional immersion mill manufacturer with a complete after-sales expert team. We have been working on wet grinding equipment for decades, constantly adjusting the immersion mill. and innovation, we can supply the entire production line for related industries.

Related production lines

Leave a Reply

Your email address will not be published. Required fields are marked *