Specification of high speed disperser and its installation tutorial

A high speed disperser machine is one high-efficiency equipment that can mix, dissolve and disperse various liquid mixture. Its main features are as follows: there are two (medium speed and high-speed—Type GFJ-7 and GFJ-11) or three (low-speed, medium-speed, and high-speed—Type GFJ-22 and GFJ-40) rotation speed for mixing shaft, with low-speed and medium speed for mixing and dissolving and high-speed for dispersing. By the action of high-rotation of the blade, materials will turn violently in the vessel and be bumped and cut by blades, the material will be destroyed, and then the aim of quickly dispersing, evenly mixing, and quickening dissolving can be realized. The machine is widely used in the fabrication of fine chemical products, such as paint, dye, printing ink, and adhesive composition.

High Speed Disperser

high speed disperser

The high speed disperser produced in our company can be divided into two types: Type A is the standing type which is applicable for a movable vessel; Type B is the platform type which is applicable for a fixed vessel on line flow. One machine can be equipped with 2-4 vessels for alternative use and handled easily (Fig 1). Meanwhile, we also design mixing or dispersion equipment with a high power of 55kw~132kw to cater to our customers.
High Speed DisperserFRANLI Twin Shaft Disperser

Dispersion Machine

Structure and principle of high-speed disperser

The structure of a high-speed disperser can be divided into hydraulic lifting,rotating, driving, mixing shaft, oil box, and electric cabinet.

1.Hydraulic lifting part

Working principle It is composed of a plunger and hydro cylinder. Wheel box is lifted by hydraulic oil of gear pump in oil box and will descend by oil drainage for its dead-weight. Rotating part

2.Working principle

The connection of the tank and wheel box is blocked off by ball bearings and locked tightly by compression ring, friction disk, and driving handle. When the driving handle is loosened, the wheel box will turn at an angle of 360o.

3.Driving part

Working principle The driven wheel 2 is driven to rotate by driving wheel 6 with Belt 5 in double-speed or three-speed motor 16, then the machine is driven to operate.

4.Mixing shaft

Working principle The dispersing shaft is supported by a rolling bearing with dispersing disk equipped at the bottom. The power is sent from the driving part to mix, dissolve and disperse the material.

5.Electric control box

It is composed of electrical elements, press buttons, and boxes. The box cover and box door are attached with Electrical Diagram or circuit diagram.
High-Speed Disperser
We could also manufacture customization mixers in accordance with customer’s orientation.

Copyright Notice :
This article only represents the author’s point of view.
This article is published under the authorization of the author.
Source: Franli

This article address : Specification of high speed disperser and its installation tutorial

Related Products

lab three roll mill

Three roll mill

Three roll mills are widely used in a variety of chemical industries, from medium to high viscosity productions. FRANLI machine can break open all kinds of pigment, UV ink, offset ink, decorative paints, and Lubricants, it also can catch the greatest fine

Contact ➔
Z Blade Mixer

Z Blade Mixer

The Z blade mixer is made for extensive mixing, kneading, and stabilizing strong and high viscous materials, such as bubble gum bases, bread, caramel mass, body wash platform, and glue.

Contact ➔
high speed disperser

HSD High Speed Disperser

FRANLI high-speed disperser is widely used in coatings, paints, dyes, inks, latex paints, adhesives, papermaking, silica gel, putty powder, color pastes, and other chemical industries, and it can be used with three-roll mills, bead mills, and reactors.

Contact ➔


Sigma Mixer: Product Manual

Sigma mixer, also known as a double Z paddle mixer, is mainly used for mixing or kneading materials with very high viscosity (over 500,000 cps).

What is Oxygen Generator Plant?

An Oxygen Generator Plant is an industrial facility that produces oxygen for various applications. Oxygen is an essential element for human life, and it has many uses in different industries, including healthcare, aerospace, and manufacturing.

What is a Lab Reactor?

A lab reactor is at the core of laboratory exercises in various scientific and engineering disciplines. It provides an environment that allows scientists and researchers to conduct experiments and simulations of chemical reactions, which aid in developing new products and optimizing processes.

Leave a Reply

Your email address will not be published. Required fields are marked *