Home » Exploring the practical aspects of high speed disperser
Exploring the practical aspects of high speed disperser
What do you understand by a disperser?
Nature of its operation
Through the suction created, the liquids and solids are drawn within the rotating disc. There is a visible whirlpool happening at the top of the mixture down to the top side of the disc in terms of this suction. The disc extending from the bottom of the tank to the underside of the disc is pretty similar to that of the whirlpool which is created. Although they are quite common for the practice over the industry, it is often referred to being the vortex or the visible upper side since the whirlpools here are mainly two vortices.
The energy or the horsepower that is used for driving the disc is instantaneously transferred from the disc into the high speed dispersion mixer when the solids or the liquid is entering the vortices and is sucked into the high-speed disc of the machine here. Some instantaneous changes within the mixture that are contacting the disc progressively with the help of the energy transfer are focused intensively.
They are mainly a series of individual horizontal layers that are descending to down from the top and up through the bottom facing the rotating disc is what. You need to think about the mixer here. The disc is contacted by each layer and then accelerated instantly through the slow movement of the vortex into the very higher speed of the disc being projected to the exteriors away from that of the disc towards the wall of the tank. Shear forces are the rapid tear apart of that of the layer on layer of the mixture.
Disperser and Agitator
It is a great and efficient mixer when it comes to the high-volume low-powered pump, which is an agitator. For every 10 gallons compared to the application of the agitator, a typical dispersion application needs about 1 HP. The agitator, however, does not create any sufficient shear for dispersing most of the solids into that of the liquids as they are highly efficient pumps here. About ½ of the normal speed of the blade for the high shear dispersers are at times used in place of the agitators when a kind of shear is required here for the operation of the moderate shear dispersers. In terms of promoting a better pumping and needing about 1/3 the HP of the high speed dispersion mixer, the discs typically have larger teeth.
The need for disperser
Limitations of a disperser
High-speed disperser
The operating range of the disperser can be extended with the addition of supplementary agitation that can aid in feeding the blade of the disperser. A shaft mixer is what this machine is generally known to be as offered by the leading manufacturer and suppliers of Franli. Both slow-moving blades on the sweeper and shaft are there in this that can help promote the flow of the mass with the addition of mixing shafts to the blades of the disperser for generating higher shear.
Copyright Notice :
This article only represents the author’s point of view.
This article is published under the authorization of the author.
Source: Franli
This article address : Exploring the practical aspects of high speed disperser
Related Products
Granite Three Roll Mill
The granite three roll mill is suitable for the grinding of various art pigments, water-based colorants, pasty raw materials, chocolate, vanishing cream, cosmetic pigments, lipsticks, and other materials. It has its unique grinding effect.
Horizontal Bead Mill
Horizontal Bead Mill is used for the grinding of a solid-liquid two-phase system. In the grinding process, the material is pumped into the Horizontal Bead Mill, and the rotating grinding disc transfers energy to the beads. The beads impact the material an
Twin Shaft Disperser
The Twin Shaft Disperser is composed of two sets of mixing devices. Different mixing devices can be designed according to different materials.
News
High Shear Mixers in Biopharmaceutical Applications
high shear mixers are highly versatile and can be used for a wide range of applications in biopharmaceutical manufacturing.
Operating Guide for Laboratory Reactors
Laboratory reactors play a crucial role in chemical research and development. Understanding the proper operating procedures is essential to ensure accurate results and maintain a safe working environment.
Glass Reactors and Selection of Stirring Blades
Glass reactors, also referred to as glass reaction vessels, are vessels made from high-quality borosilicate glass material.
High Shear Mixers in the Resin Industry
High shear mixers are essential equipment in the resin industry for achieving uniform dispersion of solids into liquid matrices, emulsifying oil-based components, and blending various additives to create resin formulations with desired characteristics.
High Speed Dispersers for Painting: Enhancing Efficiency and Quality in the Coating Industry
High-speed dispersers are powerful machines used in the paint and coating industry to disperse solid particles into liquid components effectively.
Ribbon Blender Mixer: The Right Choice for a High-Quality Blender
Ribbon blender mixers, also known as ribbon mixers or ribbon blenders, are horizontal mixing devices characterized by their unique ribbon-shaped agitators.