Triple roller mill|Wet grinding equipment

Triple Roller Mill

A triple roller mill is one of the most effective pieces of equipment for grinding and dispersing high-viscosity materials. Grinding, but because the grinding roller shaft is easy to react with acid and alkali components or other corrosive materials, it is easy to cause damage to the triple roller mill, so a special triple roller mill needs to be customized.

Details of Triple Roller Mill

  • Two types: handwheel and digital control gap
  • Safe scraper socket, Emergency-stop
  • Space-saving desktop models
  • Drip tray for easy cleaning

Application: Paint, Adhesive, Battery, Pharmaceutical industry, Cosmetic

Triple Roller Mills has high surface hardness and good wear resistance, and we can also choose a cooling device to ensure continuous operation. According to the different grinding effects of materials, a heated triple roller mill can be selected. The commonly used triple roller mill There are many types of roll mills, such as laboratory triple roller mills for laboratory research, factory-made hydraulic triple roller mills, and manual triple roller mills.

The grinding state of the three-roll grinder is the same, mainly through the belt deceleration to make the motor-driven drum rotate, and then through the gear speed change, the speed requirement of each drum is obtained. When grinding materials through a three-roller, it is necessary to adjust the fast and slow rollers to appropriate positions and adjust the corresponding grinding speeds of the three rollers according to the grinding requirements of the materials. The operator needs to add the grinding slurry to the middle and slow rollers On the baffle between the middle and slow rollers, the pulp is extruded from the surface of the middle and slow rollers, and then the pulp is brought to the baffle roller, and then scraped off the ground by the discharge scraper, and flows into the pulp barrel through the blade disc equipped with the scraper, forming the whole grinding process.

The composition of the triple roller mill

(1) Body
(2) Discharge plate
(3) Cooling system
(4) Roller
(5) Baffle plate
(6) Electrical switch or electrical control system
(7) Handwheel
(8) Transmission system

Maintenance of triple roller mill

1. Under normal circumstances, the factory needs to carry out an overhaul after using the triple roller mill continuously for about half a year.
2. The maintenance of the triple roller mill is very simple. We need to disassemble and wash the washable parts, replace them with clean lubricating oil, and carefully check the smoothness of the oil circuit.
3. Many times, the problems of the machine can be found in the process of dismantling and washing. Engineers need to repair them in time if they find problems.
4. When using the triple roller mill, if the roller is found to be deformed, it must be stopped and re-grinded to prevent problems in material grinding.
5. When the roller has been repaired and ground many times, the diameter of the roller will generally shrink. Once it is smaller than the requirement, the transmission gear will be tight and there will be gaps between the rollers. At this time, the gear must be corrected.

6. The sharp edge of the discharge blade of the triple roller mill needs to be carefully checked and corrected before installation to achieve smooth grinding. Sprinkling thorns and cracks are not allowed. After the blade is used for a short time, the countersunk head screw can be loosened. Remove and reuse.

FRANLI is a triple roller mill manufacturer and supplier with several independent research and development technologies, and after more than 20 years of accumulation, we have realized the supply of multiple production lines, such as electronic paste, resin, ink, etc., if You are looking for a suitable triple roller mill manufacturer, or a production line, you can contact FRANLI directly, we will provide the best solution within 24 hours.

Welcome to send inquiry to us and let’s make a win win business together !

Guidelines For Three Roll Mill

Three roll mills are widely used in a variety of chemical industries, from medium to high viscosity productions. FRANLI machine can break open all kinds of pigment, UV ink, offset ink, decorative paints, and Lubricants, it also can catch the greatest fineness in cosmetics/ lipstick and electronics industries. 

Lab Three Roller Mill
Guidelines For Three Roll Mill

Three Roll Mill For Grease

The three roll mill plays a vital role in the grinding of grease. Grease is essentially a kind of lubricating oil, which is a solid or semi-solid product formed by one or more thickeners through the grinding and dispersing action of a three roll mill.

heating three roll mill
Guidelines For Three Roll Mill

Three Roll Mill For Attapulgite | Glue Grinding Equipment

Three roll mill is the main equipment for grinding attapulgite. The attapulgite is ground and dispersed mainly because it is a natural colloid. Even if the size of the attapulgite reaches 0.1mm, it cannot be easily dispersed by the machine, so the final state of attapulgite formation has been greatly developed.

manual three rolll mill trs9
Guidelines For Three Roll Mill

Rolls of a three-roll mill

The three-roll mill is mainly used for grinding materials of various viscosities and is one of the best wet grinding equipment. The dispersing and emulsification effect of the three-roll mill is excellent, especially for ink, paint, colloid, chocolate, plastic, cosmetics, etc., whether it is liquid slurry or paste material, the three-roll mill can work easily.

Leave a Reply

Your email address will not be published. Required fields are marked *