Horizontal bead mill for coatings
Horizontal Bead mill
Horizontal Bead Mill is used for the grinding of a solid-liquid two-phase system. In the grinding process, the material is pumped into the Horizontal Bead Mill, and the rotating grinding disc transfers energy to the beads. The beads impact the material and grind it to the required fineness. The Horizontal Bead Mill is suitable for fine grinding of materials, which can grind materials to the micron or sub-micron fineness range, and the particle size distribution is concentrated, and the energy consumption per unit output is low.
Details of Horizontal Bead Mill
- The frame of Horizontal Bead Mill
- Grinding system of bead mill
- Double mechanical seal of horizontal bead mill
- The transmission system of the bead mill
- Grinding cylinder of bead mill
Application: Paint, Adhesive, Battery, Pharmaceutical industry, Cosmetic
The coating horizontal bead mill has the transmission structure and mechanical shaft seal of the device between the ground structure, and the shaft seal of the machine of the circulating lubricating solvent type liquid machine, so that the grinding material and the transmission structure are separated for circulating lubrication The solvent of the mechanical shaft seal circulates in the storage barrel and delivers cooling water to circulate cooling and lubrication.
The grinding work of the horizontal bead mill is mainly carried out in a fully sealed, pressure-type grinding cylinder, running and grinding at high speed. Therefore, the problem of solvent-free volatile air pollution ensures the hygiene of the workshop and the physical and mental health of the operators. Also because there is no solvent volatilization and energy saving, the production cost is greatly reduced. Coatings only work when applied to the surface of the substrate.
Generally speaking, there are three functions of paint:
When the object is exposed to the external environment, it will be affected by air oxidation, moisture corrosion, etc., which will affect the normal life of the object. The coating can prevent or delay the occurrence and development of this phenomenon. Protection is the main role of coatings.
The paint applied on the surface of the object can get a colorful appearance, decorate the colorful world, and beautify the environment. This is a side effect of the paint.
With the development of people’s lives, the requirements for coatings will become higher and higher. Modern coatings will have more and more special functions: insulating paint after adding insulating materials, anti-mildew paint after adding fungicides, non-stick pot paint after adding special materials, UV-absorbing paint, noise prevention, and reduction Vibration, and other special functional coatings.
The bottom of the grinding cylinder of the horizontal bead mill is equipped with a slideway, which is very convenient to replace the grinding beads and disassemble them during the maintenance process. As long as the set screw is removed, the abrasive cartridge can be pulled out and the beads will flow out.
The raw material transportation of the horizontal bead mill is a pneumatic double-diaphragm pump and a gear pump respectively. The selection of the primary physics, properties, and properties of the raw material to be milled in use depends on the selection of the primary physical, properties and properties of the raw material to be milled.
The horizontal bead mill adopts wet grinding, which makes the intermediate grinding faster and more uniform.
FRANLI has developed and produced a series of wet dispersing and grinding equipment with independent intellectual property rights, such as bead mill, disperser, emulsifier, mixer, filling machine, grinding media and other products, “FRANLI online dispersion system” equipment production line, Solve the dust feeding dispersion grinding scheme. It is widely used in coatings, inks, pesticides, dyes, inkjets, functional ceramics, nano-powders, food, batteries, and other industries, and has been widely recognized by the market.
Welcome to send inquiry to us and let’s make a win win business together !
Guidelines For Bead Mill
Bead Mill（sand mill） helps many factories to improve production. Grinding for low viscosity, well-flowing material. Self-cycling cooling system. Don’t need the cooling pump. Franli produces Disc Bead Mill, Pin Bead mill, Turbine Nano Bead mill, etc. Optional material of inner chamber and disc: hardness Alloy, Zirconia, PU.
Dyno mill is nothing but an agitator bead mill. It is widely used in the production of paints, coatings, agrochemistry, and pharmaceutical products.
Pearl Mill can handle both high and low viscosity materials. One is for Nano grinding materials, while the other is for high viscosity materials like offset ink. The operation of the Pearl Mill is straightforward, and all maintenance; may be handled quickly and efficiently. Adding grinding media from the feeding hole is simple.
The Bead mill is one of the main grindings and dispersing equipment in paint production. Bead mills for coatings are mainly divided into four categories: vertical, horizontal, basket, and special-shaped bead mills.
Dyno mill is a type of bead mill machine which is used in the coating industry specifically, in the manufacturing of inks products.
The laboratory bead mill in the chemical experimental equipment, also known as the lab sand mill, is a kind of grinding equipment compared with the bead mill for industrial production.
The bar pin bead mill is a machine suitable for ultra-fine dispersion and nano-scale grinding of water-based and solvent-based materials. The bar pin bead mill is one of the most widely used production types of equipment. With its very stable performance and sophisticated technology, it has been recognized by a wide range of users. The key thing to know is the characteristics of the bar pin bead mill, which is also the key to people’s favor of it.