Industrial high speed disperser

High Speed Disperser

The FRANLI-Dissolver is a high-speed disperser with a toothed dispersion disk. It is suitable for dispersing, homogenizing, and mixing solids in liquids. Using the high peripheral speed at the dispersion disk, strong shearing stresses are transmitted to the product and translated into frictional work. The Dissolver is suitable for manufacturing mixing components with a viscosity of up to 200 Ns/ m2 (2 000 Poise). The protection devices being built off the high-speed disperser correspond to the instructions of the Trade Association of the Chemical Industrie.

Details of High Speed Disperser

  • Height limit switch
  • Container clamping device
  • Speed Automatic
  • Vacuum equipment
  • Scraper
  • Swiveling device

Application: Paint, Adhesive, Battery, Pharmaceutical industry, Cosmetic

high speed disperser is the basic need of the industries, and it is called an industrial mixer that contains disc-shaped blades mounted on the mixing shaft. These blades help in mixing and uniformly dispersing the material. You can speed up your work activities with this disperser and increase the quality of the work.

In addition, you can find different shapes and sizes of the blades and mixing shafts. And, it is up to you, whether you choose. And it depends on the work profile of the company. Also, you can adjust the speed of the mixing cabinet according to the work requirements, and it enhances the stability and quality of the work.

high speed disperser

For this purpose, you need the best quality high speed disperser so that you can achieve the company’s goals effectively. The disperser should not be blocked or broken while performing the mixing activities. So, you should inspect some factors of this disperser, and these are as follows:

●Check the viscosity: When you go for a disperser, you need to check all the features and parts so that you can use them throughout your life. For this purpose, check the viscosity of the disperser, and it can be mixed with the one shaft mixer. Usually, the viscosity range is 50,000 centipoises and the material is within the limit of this range. In this case, the material will flow well. And, it increases the quality of the product, and in this way, you can become the most liable entrepreneur and get almost all the contracts. Here, it is necessary to check the range of the viscosity so that you can mix and disperse all types of material smoothly and comfortably.

●Check the volume: The next inspection is to check the volume of the high speed dispersion mixer so that you can meet all the requirements of the production. Consider all the needs of the companies, such as workloads, available workers, batch sizes, and many other necessary considerations. In this way, you can evaluate the needs of the company accurately and get the specific volume of the disperser for your company. If you do not do the same, you may install the wrong machine and suffer low production. So, this consideration is necessary to get the right volume for the company to enhance the production rate.

●Check the design of the vessel: It is also a necessary part of the disperser. If the vessel design is correct, it promotes the best flow of the material and reduces the dead spots as well. Try to choose the disperser that has the same diameter and height as it is the most preferable disperser by almost all the industries. But, if you do not follow these instructions, you may lose your productivity. Here, it is necessary to choose the accurate vessel size so that you can perform the required work activities on it comfortably. Further, various companies provide these dispersers at the best rates. And you can select anyone that suits all the requirements of the company. So, inspect the vessel size well for the company’s production rate.

●Check the disperser size: When you buy any high speed disperser, check its size so that you can comfortably perform all the tasks of mixing and dispersing. Normally, the diameter of the blade should be around one-third the diameter of the vessel. So, try to inspect it well so that you can get the best results out there. If the blade size is not correct, you can never get the desired results. For this purpose, you need to check the right disperser size so that you can get the uniform mixer, and in this way, you can consider the best further production forecast.

●Check the speed: The speed of the high speed disperser matters a lot for the higher production rate of the company. And, the normal speed of the blades is 4800 – 5200 feet per minute. In the given speed range, you can perform all the mixing and dispersing activities comfortably and smoothly. But if you do not choose the right speed, your work performance may suffer, and you may lose the production rates. Here, it becomes necessary to choose the correct speed of the blades so that you can get desired work performances without putting in so much effort. Thus, always try to inspect the right speed of the blades before installing the disperser machine in your company to achieve the best conversion ratio.

●Check the quality: It is the most important inspection in order to achieve higher production. You should check the quality of the machine as it should be robust and durable so that you can perform all types of activities on it, whether it is heavy duty or not. In case, if you do not consider this thing, you may get cheap quality machines and later they may lose their working capacity or be broken. So, here, it becomes so necessary to choose a high-quality disperser so that you can work on it last along. 

After inspecting the above factors, you can get the correct high speed dispersion mixer for your company. These entire above factors are necessary to get the best out there. As a result, you can achieve all the desired goals of the company. For this purpose, you can get this disperser through any available company that deals in these types of machines.

Also, Franli is the best company out there offers all its dispersers and other equipment with the assurance of best quality and durability.

When you consider getting these dispersers for your industries, you need to inspect some factors so that you can get the correct machine for your company to achieve all the desired goals. For this purpose, you can contact any automation company that deals in this equipment.

You can find many designs, sizes, and speeds in these dispersers, and it is up to you whether you choose. But, try to choose only that disperser which meets all the requirements of your company. So, keep some necessary instructions in your mind while buying these dispersers.

Welcome to send inquiry to us and let’s make a win win business together !

Guidelines For High Speed DIsperser

We produce a high-speed disperser according to the industrial standard, Franli HSD’s frame is bigger than the marketing machine, the blade is double layers, hydraulic part is an engineering oil tank, which is more stable lifting up and down. The operation box for Water-based material is stainless steel, which also has ex-proof operation for solvent based material.

high speed disperser
Guidelines For High Speed Disperser

High Speed Disperser: An Essential Tool in the Manufacturing Industry

A high speed disperser is a machine used for dispersing, mixing, emulsifying, and homogenizing materials in the manufacturing process.It is also called a high-speed mixer or agitator, and its versatility makes it a valuable tool in various industries, including coatings, paints, inks, adhesives, pharmaceuticals, food, and cosmetics.

high speed disperser
Guidelines For High Speed Disperser

The high speed disperser chosen by the chemical industry

The high speed disperser is the indispensable equipment in the production and dispersion process of chemical products. Because of its high speed, it can not only effectively improve the dispersion efficiency of materials, but also make the materials more fully dispersed, to meet the final requirements of the materials.

high speed disperser
Guidelines For High Speed Disperser

How to use the high speed disperser (new machine)?

The high speed disperser is composed of a frame, a bearing seat, a dispersing shaft, a dispersing wheel, an oil cylinder, a hydraulic station, and a control cabinet. The lifting of the frame adopts hydraulic transmission, and the lifting is stable and reliable.

high speed disperser
Guidelines For High Speed Disperser

High speed disperser: dispersing, stirring, grinding, dissolving

High speed disperser is common mechanical equipment in chemical production. It is widely used in architectural coatings, chemicals, water-based coatings, oil-soluble architectural coatings, inks, inks, adhesives, etc.

Leave a Reply

Your email address will not be published. Required fields are marked *